Creates a solid, permanent mark when laser engraved
Weather, Chemical, and Abrasion Durability -See Test Data
Non-Clumping - Easy to Work With
From domestic and foreign components
Enduramark Black Laser Marking Spray creates a solid black laser engraving on uncoated stainless steel. The paste is diluted with denatured alcohol and then applied to a clean metal surface with an airbrush, Preval sprayer or alternatively can be brushed on, although this is not the preferred method for an even coating.
After laser engraving, the unused residual material applied to the metal is easily removed with water.
NEW! Dilute & Go™ - Add denatured ethanol to the indicated fill line, shake well, use. No measuring required. (Not available with 1000 g size)
100 grams diluted 2 parts denatured ethanol to 1 part Enduramark will cover approximately 2000 square inches.
***Note: A minimum laser output of 20 watts is required.
Patents Pending
CALIFORNIA PROP 65 WARNING: This product can potentially expose you to chemicals, including Crystalline Silica/Quartz, which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
