Laser Marking Spray Can - Black
Regular price $49.99
Product Details
Buy 4+ Spray Cans and Save $5 on Each with Code: 5OFF
 |
Permanent Laser Marking |
 |
Fully Tested Weather, Chemical, and Abrasion Durability - See Test Data |
 |
Superior Formulation Non-Clumping - Easy to Work With |
Enduramark Black Laser Marking Spray creates a solid black laser engraving on uncoated stainless steel.
After laser engraving, the unused residual material applied to the metal is easily removed with water.
Patents Pending
CALIFORNIA PROP 65 WARNING: This product can potentially expose you to chemicals, including Crystalline Silica/Quartz, which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
The product is excellent. Appreciate the storage instructions and the inclusion of an extra spray nozzle. Used on stainless steel pocket knife. Perfect spray application and crisp clean marking with laser.
United StatesMy overall experience was excellent, the Enduramark product was easy to use and worked exactly as intended. The laser marking spray applies easily and lays down with light even coats. This product can be removed simply with a dry rag and some water if needed. I found Enduramark left a very nice even black marking once I found the correct power level and I did not see the same heat transfer to the stainless metal as I have with some other competition products when I ran the laser at higher levels. I would Highly recommend this product over some of the competition products. The only con is that it will wipe off easily, so if you need to use a Rotary with full length barrel tubes. The rotary may wipe off areas. But it is a fantastic product and I will be using this a lot in the future.
United StatesCompared to Cermark this product is the same or better and better customer service.
United StatesGreat Product this works great
United StatesEnduramark is very easy to use. I had my aluminum blanks lightly covered and ready to be put in my Glowforge in a few short minutes. It looked great, the lasered part came out crisp and clear!